Produse pentru omnisfix luer solo (15)

An anti-dust chemical/mechanical revitalising hardener for concrete flooring and screeds, consisting of an aqueous solution of mineral silicates and fluosilicates, activated by specific wetting agents. It is applied in several coats of decreasing dilution in water, with a brush or mechanical “scrubber”. Specific anti-dust treatments for industrial flooring or concrete slabs that have lost their original “vitality”. It reacts with the calcium compounds, soluble and unstable, present in of concrete products, transforming them into new stable, insoluble and resistant compounds. Consequent increases in resistance to wear and tear of the order of 200% -400%, significant increases in chemical stability, resistance to freeze-thaw cycles etc. Reactive impregnations for stabilising chemical and mechanical structures and concrete products. Hardening, anti-dust, anti abrasive and anti-corrosion treatments for concrete floorings. Adjustment of the chemical and mechanical performance of products for the industrial, rural and livestock construction (on horizontal surfaces). Apply, preferably with a brush or with "washer dryer" machine on the basis of the following indications: - Porous surfaces: repeated applications of a solution of water and QL Fluosil at a ratio in 1:1 - Compact surfaces: apply three coats, with decreasing dilution with water. 1a coat 1:3, 2a coat 1:2, 3a coat 1:1. The consumption of QL Fluosil will be proportional to the absorption of the floor to be treated. Indicatively a porous surface will consume about 400 g/m², while a surface with normal porosity will consume 250-300 g/m². Leave the product to dry between one coat and the next and then, after the last coat, wash with copious amounts of water. Protect glass and aluminium surfaces during application. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface".

Formulated with organic acid technology (OAT), it is a long-lasting concentra ted cooling fluid that ensures that the engine operates at ideal operating temperature in all four seasons. The specially developed green design is ethylene glycol based antifreeze and does not contain nitrite, amine, phosphate, silicate and borate. Before use in all climatic conditions ta provide optimum performance in the radiators of motor cooling systems, dilute with 50 % pure water.

Battery Cycle Count A typical cell phone battery goes through approximately 500 cycles before retaining at least 80% of its original capacity. Made from new materials, our batteries have zero cycles, ensuring the maximum number of cycles you can use. Zero Cycle Count, so you have the maximum amount of cycles remaining. Lithium-Ion Polymer technological materials Strict QC test Less than 1% failure rate 12 Months Warranty

LUXLINE - MODEL SI SI/F numer artykułu:SI/F

Spécifique pour les produits difficiles à démouler, par exemple riches en sucre et en protéine. Excellent pouvoir anti-adhérent. Viscosité :700 à 1100 mPa.s (25°C) Valeur d’iode:± 80 Point de fumée:230 °C POIDS SPECIFIQUE:920 kg/m3 (20°C) Formats disponibles:10L – GRV 1000L

Tape and reel specification for all CXSM SMD crystals.

Das Premium-Glasfalz-Silikon

Rasch trocknendes, einfach zu verarbeitendes Pflegeöl für die Behandlung von Laub- und Nadelhölzern. Sehr gutes Eindringvermögen, ausgezeichnete Anfeuerung des Holzes, sehr gute Füllkraft, sehr gute Wasserbeständigkeit und angenehme Haptik.Die Härtung erfolgt durch Aufnahme von Luftsauerstoff (oxidative Trocknung). Legno-Öl Farblos Mit dem neuen Legno-Öl ist den ADLER-Entwicklungslabors eine natürliche und hochwertige Lösung im Bereich der alternativen Oberflächenbeschichtung gelungen. Dieses universell einsetzbare, schnell trocknende Öl ist vor allem für Möbel im Wohnbereich und Innenausbau (Holzverschalungen, Holzdecken) sowie für Holz- und Parkettböden die optimale Pflege. Das neue ADLER Legno-Öl Weiß eignet sich besonders für helle Hölzer wie z.B. Ahorn, Fichte oder Eiche. Der natürliche Farbton wird beibehalten und der Werkstoff behält seinen ursprünglichen Charakter. Wichtig bei der Verwendung des Legno-Öl Weiß: achten Sie auf einen gründlichen Holzschliff und ein...

OLIK HM 22 - 1000L OLIK HM 22 - 208L OLIK HM 22 - 20L Gamme:OLIK Secteur:HYDRAULIQUE Code EAN/CTIN:3701344705756

Roulettes pivotantes à oeil roue jante polyamide bandage caoutchouc gris non tachant. Supports acier embouti zingué. Du diamètre 80 au au 200 mm De 50 Kgs à 205 Kgs de charge utile.

Fl20 Fluor Liquid Cod. Art:FL20 Ean Code:8022937433494 Temperatura aria:-4C°... -14C° Umidità aria:H° > 50% Tipo di neve:neve fredda, nuova,fine. Ottima con neve cadente fredda Umidità neve:poco umida

LED Anzeige zur Visualisierung der Emissionsersparnis an CO2 durch eine bestehende Biogasanlage. Das Layout der Scheibenfolierung erfolgt nach Kundenvorgabe. Die aktuellen Werte werden per ModBus-Protokoll vollautomatisch aus dem Leitrechner der Anlage abgerufen und dargestellt. Anwendungsbereich:outdoor Schrifthöhe:175mm max. Leseentfernung:ca. 70-80m LED Farbe:Rot Ansteuerung:Ethernet / ModBus

Spécifique pour les produits riches en sucre et/ou protéine. Protège le matériel de cuisson. Parfaitement adapté aux formes et platines en aluminium recouvertes ou non d’un coating. Spécifique pour les produits de longue conservation. Viscosité :± 170 mPa.s (25°C) Valeur d’iode:± 40 Indice peroxyde:Max. 3 POIDS SPECIFIQUE:920 kg/m3 (20°C) Formats disponibles:10L – IBC 1000L

Der extrem wasserbeständige Premium-Hybrid-Klebstoff

Glider con basso contenuto di fluoro Garantisce accelerazione, velocità e alta repellenza all'acqua e allo sporco. Può essere utilizzate da sola o come base per le cere fluorurate in polvere o liquide. Cod. Art:LF20 Ean Code:8022937433302 Temperatura aria:-8C°... -20C° Umidità aria:H° 30 - 50% Tipo di neve:neve nuova o trasformata Umidità neve:umida Applicazione:applicare a caldo T° ferro 160C°